Choose a product


EXPERT LINE® Brunnen Foam for septic tank elements


EXPERT LINE Brunnen Foam for septic tank elements
One component mounting and sealing foam exhibiting perfect adhesion to typical construction materials such as concrete, masonry, stone, wood, aluminium, PVC including PVC covered with powder paint as well as glazed surfaces and the like.

Available capacity: 750 ml

Usage:
  • specifically recommended for sealing and joining septic tank elements, in shafts and various types of underground tunnels
Product features:
  • high resistance to organic compounds
  • high mechanical strength and perfect adhesion to typical construction materials such as concrete, masonry, stone, wood, aluminium, PVC including PVC covered with powder paint as well as glazed surfaces.
  • perfect thermal insulation and soundproofing parameters
  • resistant to mould and funghi
Directions for use:
  • Clean and degrease the working substrate.
  • Before use, make sure that the can temperature is above zero (optimum temperature +20°C).
  • Shake the can well (for about 30 sec.) in order to mix all the components thoroughly.
  • Attach the applicator to the can and when applying hold the can upside down.
  • Apply the foam from the bottom to the top of the crack.
  • The crack should be filled up to 50% of its depth, maximum 5cm per layer. If the depth of the layer exceeds 5 cm a few layers should be applied.
  • After application each layer should be dampened with water by means of e.g. a sprayer.
  • After curing, remove excess mechanically (e.g. with a knife).
  • After foam is fully cured, protect it against UV radiation using e.g. plaster or paint.
Download: Logistics information:

Capacity Packaging type Bulk packaging Number of pieces
on a pallet
750 ml Can Cardboard box 12 pcs 768 pcs