Language version: 
Choose a product
EXPERT LINE® Gun Foam
Winter version available.
Available capacity: 750 ml, 500 ml
Usage:
- specifically recommended for professional mounting windows and doors
- thermal insulation of water, sewage and central heating systems
- crack filling in building thermal insulation.
- high mechanical strength and perfect adhesion to typical construction materials such as brick, concrete, plaster, wood, metals, foamed polystyrene, hard PVC and rigid PUR foams,
- perfect thermal insulation and soundproofing parameters
- cures when exposed to air moisture
- resistant to mould and funghi
- Clean and degrease the working substrate.
- Before use, make sure that the can temperature is above zero (optimum temperature +20°C).
- Shake the can well (for about 30 sec.) in order to mix all the components thoroughly.
- Attach the applicator to the can and when applying hold the can upside down.
- Apply the foam from the bottom to the top of the crack.
- The crack should be filled up to 60% of its depth, maximum 5cm per layer. If the depth of the layer exceeds 5 cm a few layers should be applied.
- After application each layer should be dampened with water by means of e.g. a sprayer.
- After curing, remove excess mechanically (e.g. with a knife).
- After foam is fully cured, protect it against UV radiation using e.g. plaster or paint.
| Capacity | Packaging type | Bulk packaging | Number of pieces on a pallet |
| 750 ml | Can | Cardboard box 12 pcs | 768 pcs |